top of page

Typically, a cabbing machine has an array of six grinding and polishing wheels arranged next to each other on a long shaft. The shaft may be directly attached to a motor or it may be mounted on bearings and attached to a belt and pulley drive. The abrasive surface is on the cylindrical perimeter of the wheels.

Each wheel on the shaft employs a different mesh size abrasive and the wheels progress incrementally from coarse for shaping to medium for smoothing to fine and extra fine for polishing. A water drip system or splashing system keeps the wheels wet and a shroud catches water flung from the wheels as they spin.

The coarse grinding wheels are often metal with diamond grit either sintered or electroplated to the grinding surface. The fine abrasive wheels are often composite materials with some cushion and the grit is bonded to the grinding/polishing surface with resin. Sometimes a leather disk charged with polishing compound such as cerium oxide is mounted on the end of the machine for a final buffing finish.

Our 6inch 8inch Lapidary Combination Unit cabbing grinder Polisher Machine with 1"stainless steel shaft and ball earings,7pcs Aluminums Spacers and Flanges and locknut It also has a 3/4HP Thermal protected ball bearing motor, the Hood process by 304 stainless steel.The Cover has two U-Slot for easy remove. We also can supply a adjustable drip water system with 8 shut off valves for each wheel. The shaft is tapped for a ¼-20 spin-on polish head at right ends and tapped for a 1/2” Aluminum lap or Diamond Facet Laps at left ends. Accepts silicon carbide or diamond wheels or rubber expandable drums.

Features :

1. Grinding Wheels: Cabbing machines typically have multiple grinding wheels of varying grit sizes. These wheels are used for the initial shaping and grinding of the gemstone. Coarse grit wheels are used first to remove material quickly, followed by finer grit wheels for smoother surfaces.

2. Polishing Wheels: After the initial grinding,polishing wheels with special polishing compounds are used to achieve a high-gloss finish on the cabochon. These wheels often have a leather or felt covering to hold the polishing compound.

3. Water System: Many Cabbing machines incorporate a water system to cool and lubricate the grinding and polishing wheels. This water helps prevent the gemstone from overheating and also removes debris created during the cutting and polishing process.

4. Adjustable Dop Sticks: Dop sticks are used to hold and secure the gemstone during cutting and polishing. Cabbing machines typically have adjustable dop sticks that allow you to position the gemstone at the desired angles for shaping and polishing.

5. Motor and Power: Cabbing machines are equipped with a motor that drives the grinding and polishing wheels. The power and speed of the motor may vary depending on the machine's size and design.

6. Adjustable Angles: Some cabbing machines have adjustable angles and settings to help you achieve specific cabochon shapes and angles.

7. Safety Features: Safety features such as splash guards, eye protection shields, and emergency stop buttons are essential for safe operation.

Applications:

Lapidary Cabbing grinder machines are used by lapidaries, jewelers, and hobbyists for the following applications:

  1. Gemstone Cabochon Making: The primary purpose of a Cabbing machine is to shape and polish gemstone cabochons, which are used in jewelry making.

  2. Lapidary Art: Lapidarists use these machines to create intricate designs and patterns on gemstones.

  3. Jewelry Making: Cabochons produced using Cabbing machines are often used in rings, pendants, earrings, and other jewelry pieces.

  4. Hobby and Collectibles: Enthusiasts and collectors may use Cabbing machines to create custom gemstone  cabochons for personal collections or as gifts.

  5. Restoration: Cabbing machines can be used to restore the appearance of older or damaged cabochons.

When using a lapidary Cabbing grinder machines , it's essential to follow safety guidelines, wear appropriate protective gear, and have some experience or training in lapidary work. Gemstone cutting and polishing can be a rewarding craft, but it requires skill and attention to detail to achieve high-quality results.

Lapidary Slab Trim Saw

Not all rocks and gemstones are sized equally, so when it comes to cutting your rock collection, there are two types of saws you’ll need; a trim saw and a slab saw.

A trim saw has a small, thin blade, that is made for cutting small stones into smaller chunks, or for creating a flat edge for a cabochon. Hi-Tech’s Diamond trim saw is a good starter option.

A slab saw has a larger and thicker blade, making it suitable for trimming down rough rock slabs, or large stones that won’t fit into a trim saw . This slab saw option has a vise to help you trim the rock safely.

Hans offer lapidary trim saws and slab Saws for sale at competitive prices,trim or slab saw for cutting and slicing the smallest to the largest rocks and glass piece.A good trim saw is a basic piece of equipment for every glass and lapidary artist. Whether you are going to make a cabochon, a flat specimen for mounting, a faceted stone, or slicing glass for a unique piece, you will want to reduce your material to a workable, and approximate shape before proceeding to the grinding, sanding and polishing operations. It is fundamental that the trim saw be extremely sturdy, that the saw arbor be mounted with precision and the bearings sealed against intrusion of abrasive waste. It is essential to have ample cutting deck space and a tank that is easily cleaned.

Features:

  1. Blade: Lapidary trim saws are equipped with a circular saw blade with diamond-impregnated edges. Diamond blades are essential for cutting through hard and abrasive materials like rocks, minerals, and gemstones.

  2. Water Cooling: Many lapidary trim saws feature a water cooling system to minimize heat generated during cutting. Water also helps to lubricate the blade and wash away debris, resulting in cleaner cuts and prolonged blade life.

  3. Adjustable Table: The machine typically has an adjustable table or vise where the rough material is secured for cutting. This table can be moved horizontally and vertically to achieve precise cuts.

  4. Feed Mechanism: Some trim saws have a feed mechanism that allows for controlled and consistent movement of the material through the blade.

  5. Safety Features: Safety shields and guards protect the operator from any debris or water spray generated during cutting. It's important to use proper safety equipment, such as safety glasses and a dust mask, when operating a lapidary trim saw .

  6. Variable Speed: Some models offer variable speed settings to control the cutting speed based on the material being processed.

Applications:

Lapidary trim saws have several applications:

  1. Slabbing: The primary use is to cut large rough stones into thinner slabs. These slabs can then be further worked on by lapidaries to create cabochons, faceted gems, or decorative specimens.

  2. Trimming: They are used to trim and shape rough material to remove unwanted portions, irregularities, or fractures, leaving behind clean and flat surfaces.

  3. Preparing Specimens: Geologists and mineral collectors use trim saws to prepare specimens for display or study by cutting rocks and minerals into thin sections.

  4. Lapidary Work: Lapidaries use these machines as part of the gemstone cutting and shaping process to create cabochons or faceted gemstones.

  5. Custom Jewelry: lapidary artists use trim saws to create custom-shaped gemstone pieces for jewelry making.

lapidary trim saws are available in various sizes, from small benchtop models suitable for hobbyists to larger floor-standing units for professional lapidaries. The choice of a trim saw depends on the size and type of material you plan to cut and the level of precision required for your lapidary or geological work.

How to Buy

Request an Equipment  Quote
Ready to buy stuff from Flexible,Request a quote now.
Become a Delare
Becoming a Flexbile Authorized Dealer
Shop
Browse Parts and equpments on our store
Solution
Flexbile solutions to help you tackle any challenge

Reviews

Comentarios
Rated 0 out of 5 stars.
Couldn’t Load Comments
It looks like there was a technical problem. Try reconnecting or refreshing the page.

FAQ

Q: Can you use water with a lapidary saw?

Running water or water based coolants on any of our slab saws will void the warranty, but however we do realize that for some materials, running water or water-based coolants is essential for avoiding discoloration. We do it ourselves but NOT for hard agates and jaspers.
Q: What is the best cabbing machine?
The Diamond Pacific cabbing machines are the highest quality cabbing machines on the market and come with the highest quality cabbing wheels on the market. Cutting Edge Supply always suggests these machines to any experienced cutters. The Diamond Pacific Pixie is going to be the lightest weight cabbing machine.
Q: What can you do with a cabbing machine?
Cabbing machines have multiple purposes such as cutting, trimming, grinding, and polishing.
Q: What is the best beginner lapidary saw?
Hans Diamond Trim Saw is a good starter option. A slab saw has a larger and thicker blade, making it suitable for trimming down rough rock slabs, or large stones that won't fit into a trim saw. This slab saw option has a vise to help you trim the rock safely.
Q: What is the difference between a cabbing machine and a faceting machine?
A cabbing machine only used for cutting and polishing flat and curved surfaces. It is composed of a motor, grinding wheel and accessories to grind and cut material to create cabochons, or cabochon gems. A faceting machine, on the other hand, is a more complex tool used to cut and polish gemstones.
Q: What is the difference between 6 and 8 Cabbing?
The 6″ Cabbing can be set up by one person in less than 30 minutes; however, we recommend two people. The 8″ Cabbing requires two people and also takes approximately 30 minutes to set up. You will need a sturdy table or stable surface that is well lit.
bottom of page